Body | 
Important: The BBP33 printer is obsolete and no longer supported or repaired. The replacement printer is the i3300 or i5300: i3300 - General Information and i5300 - General Information. Materials may still be available on BradyID. i3300 vs BBP33 Printer Features
Getting Started
Software Compatibility
Note: Brady Workstation does not require the Windows driver.
Note: LabelMark is obsolete and no longer supported.
Compatible Label Media
Support & Warranty Info
Note: The printer is obsolete and no longer supported or repaired.
Driver
Networking
Firmware
How to Load the Printer
Preventative Maintenance
How to Locate the Serial Number
Troubleshooting
Media
- BBP30, BBP31, BBP33 - Media Jam Error 45, Print Job Canceled
- Error 49 - Error reading media memory cell
- Error 50 - Error Reading Media Memory Cell
- B30 Series Continuous Material Compatibility Update - Error 51, Printer Backfeeds with Error 55 When Used in BBP30, BBP31, BBP33
- BBP30 / BBP31 / BBP33 / BBP35 / BBP37 - Error 52 No Media Remaining
- BBP30 / BBP31 / BBP33 / i3300 / s3100 - Media Out Error 53
- Error 54 - Media is jammed or roll is empty
- BBP30 / BBP31 / BBP33 - Error 55 / Media not detected
- BBP30 / BBP31 / BBP33 / i3300 / S3100 - Ribbon Out Error 58 and Clicking Noises
- BBP30, BBP33, BBP85, S3000, S3100 - Error 62 Ribbon too narrow
- B30 Series Printers - Error 64, Error 65, Error 68 - Error reading ribbon memory cell
- BBP30 / BBP31 / BBP33 / BBP35 / BBP37 / BBP85 - Error 66 or Error 67 Error reading ribbon memory cell
- BBP30, BBP31, BBP33, BB35, BBP37 - ERROR 66 & ERROR 68
- BBP30 / BBP31 / BBP33 / BBP35 / BBP37 / S3100 - Error 69 Media mismatch
- BBP33 Error 85 - Check and Clear Media Path, Media Jam Errors
- B30 Series Printers - Drifting print or calibration issues with Raised Panel labels
- Brady Benchtop Printers with an Auto-Cutter - Ribbon Feeding Out With Material
- BBP30 / BBP31 / BBP33 / i3300 / i5300 / s3100 - Printer Cannot Sense the Loaded Supply error
- i3300 / S3100 / BBP33 / BBP37 / BBP85 / S3700 - Faint print on labels
- BBP31 / BBP33 / BBP35 / BBP37 - Diagonal Voids or Lines in Print
- BBP31 / S3100 - Ribbon is Feeding Backwards (Reverse)
Errors
- BBP30, BBP31, BBP33 - Error 15 or "Unable to print-15"
- Error 18 Printer too warm
- Error 21 - Media Wiper Printer Error
- Error 22 Disengage Media Wiper Arm
- BBP33 Not Cutting and Gives Error 80
- BBP30 / BBP31 / BBP33 - Error 1024 - Clean Printhead
- BBP30 / BBP31 / BBP33 - Error 1025 - Number of Cuts Reaches Preprogrammed Threshold
- BBP30, BBP31, BBP33, BBP35, BBP37 - Error 1027 - How to replace the Media Wiper
- BBP33 - Check Printer error message
- BBP30 / BBP31 / BBP33 - Error Codes and Troubleshooting Guide
- BBP30, BBP31, BBP33, BBP35, BBP37, BBP85 - LCD Screen Goes Blank When Powering On
- BBP33 / i3300 / i5300 / S300 / S3100 - Drifting / misaligned text or loss of calibration
- BBP33 / BBP85 - Fatal Application Error Message
- BBP33 - Printer is Not Printing
How To
- BBP30 / BBP31 / BBP33 - What is the minimum or maximum label length?
- BBP30, BBP31, BBP33, BBP35, BBP37, BBP85 - Can third party (non-Brady) ribbons and labels be used with this model?
- BBP31, BBP33, BBP37, BBP85 - How to Center Text Horizontally
- B30 Series Printers - How to reset the printer
- BBP30 / BBP33 - How to Adjust the Cut Settings on the Printer
- Benchtop Printers - How to Print from Microsoft Word
- Printing from SKM to BBP30, BBP33, S3000, S3100, i3300 BBP35, and BBP37 Printer Models
- BBP33 - How to print from LDMS to Brady BBP33
- BBP33 - How to use a printer script file via USB flash drive
- BBP33 / i3300 - Setup to Print Using CodeSoft
- BBP33 - Can printer scripts ( BPL , ZPL , DPL & JScript ) be saved to internal printer memory?
|
|
|---|
