J7300 - Print Quality

J7300 Print Quality

 

Review each article for different print quality examples on the J7300:

 

• J7300 - Banding Text
• J7300 - Thinning Text
• J7300 - Drifting Print
• J7300 - Blurry or not aligned
• J7300 - Grainy or Noisy print
• J7300 - Mottled, Uneven Ink or Color Density
• J7300 - Voids in the Print
• J7300 - Haze or Discoloration
• J7300 - Smeared Text
• J7300 - Print on Labels is Shifted
• J7300 - No Print

 

 

For general print quality issues:

 

1. Verify the ink cartridges are installed correctly: J7300 - Install Labels and Ink Cartridges.

 

2. Verify that there is enough ink on the cartridges on the LCD screen of the printer or Brady Print Utility: J7300 - Brady Print Utility.

 

3. Run the alignment: J7300 - Align the Ink Cartridge.

Note: The printer alignment must be run whenever the ink cartridges are removed.

 

4. Verify the print mode: J7300 - Print Mode.

If the Print Mode is Draft, this will not print the full colors.

 

5. Print a test label through the Maintenance menu to verify the colors are all printing correctly: J7300 - Print a Test Label.

 

6. Clean the ink cartridge: J7300 - Clean the Printer.

 

7. Tap the ink cartridge. Use a lint free paper towel and gently tap the ink cartridge on it 5 times. Repeat in increments of 5 until all 3 colors come out.

View the video at 2:34 for an example of how to tap the ink cartridge.

 

8. Try different ink cartridges.

 

If print quality issues still exist, contact Global Brady Technical Support (Contact Information). Provide images of any printed labels, including the alignment and test label. Provide the part number and lot number of the materials: What Is The Label/Ribbon Part Number and Lot Number?