Salesforce

J7300 - Blurry or not aligned

Printable View
« Go Back

Content

 
Article Number000013228
TitleJ7300 - Blurry or not aligned
Body

Issue

Blurry or not aligned.png

The print is blurry or not aligned.


Definition

The image is distorted, less sharp and has reduced level of detail. 

Troubleshooting
 

     

     

    1. Verify the ink cartridges are installed correctly: J7300 - Install Labels and Ink Cartridges.

     

    1. Verify that there is enough ink on the cartridges via the Brady Print Utility: J7300 - Brady Print Utility.

     

    1. Run the alignment: J7300 - Align the Ink Cartridge.

    Note: The printer alignment must be run whenever the ink cartridges are removed.

     

    1. Verify the print mode: J7300 - Print Mode.

    If the Print Mode is Draft, this will not print the full colors.

     

    1. Print a test label through the Maintenance menu to verify the colors are all printing correctly: J7300 - Print a Test Label.

     

    1. Clean the ink cartridge: J7300 - Clean the Printer.

     

    1. Tap the ink cartridge. Use a lint free paper towel and gently tap the ink cartridge on it 5 times. Repeat in increments of 5 until all 3 colors come out.

    View the video at 2:34 for an example of how to tap the ink cartridge.

     

    1. Try different ink cartridges.

     

    URL NameJ7300-Blurry-or-not-aligned
    Powered by