Salesforce

J7300 - Voids in the Print

Printable View
« Go Back

Content

 
Article Number000013234
TitleJ7300 - Voids in the Print
Body

Issue

There are voids and missed or lack of a drop on the label surface. 

Voids.png


Troubleshooting
 

       

       

      1. Verify the ink cartridges are installed correctly: J7300 - Install Labels and Ink Cartridges.

       

      1. Verify that there is enough ink on the cartridges via the Brady Print Utility: J7300 - Brady Print Utility.

       

      1. Run the alignment: J7300 - Align the Ink Cartridge.

      Note: The printer alignment must be run whenever the ink cartridges are removed.

       

      1. Verify the print mode: J7300 - Print Mode.

      If the Print Mode is Draft, this will not print the full colors.

       

      1. Print a test label through the Maintenance menu to verify the colors are all printing correctly: J7300 - Print a Test Label.

       

      1. Clean the ink cartridge: J7300 - Clean the Printer.

       

      1. Tap the ink cartridge. Use a lint free paper towel and gently tap the ink cartridge on it 5 times. Repeat in increments of 5 until all 3 colors come out.

      View the video at 2:34 for an example of how to tap the ink cartridge.

       

      1. Try different ink cartridges.

       


      Related information 

      URL NameJ7300-Voids-in-the-Print
      Powered by