What Can I Do if My Labels are not Wrapping Around the Vials Correctly?
You can adjust the swing arms and pressure rollers. You want to make sure they are adjusted for guiding the cap or threading of the tubing. Make sure they come into contact with the cap or threading of the tubing. Do not tuck the tubing so far in between the transport rollers; this will make it harder to release the tubing. See page 13 of the attached user manual for instructions to adjust the pressure and transport rollers.
What if My Vial Isn't Automatically Ejecting?
Make sure the eject is turned on in the printer settings. See page 14 of the attached manual for more information.
Setup Considerations
The roller replacement on Page 9 of the user manual is not necessary.
This applicator is only intended for use with the i7100 Peel model.
