Content

Article Number	000011740

Title	i7100 Vial Label Applicator User Manual

Body

See the attached PDF.

Setup Considerations

The roller replacement on Page 9 is not necessary.
This applicator is only intended for use with the i7100 Peel model.
The i7100 driver must be configured for Peel Mode: How to Enable Peel-Off Mode in the i7100 Driver
Peel mode settings will not appear on the i7100 LCD display until the applicator has been installed.
The i7100 Peel "P" version of the driver should be installed: i7100 Peel Model Driver Configuration
Print On Demand must be enabled on the i7100 display: What is the Print On Demand Setting on the i5100 and i7100?
The i7100 must have updated to firmware version 5.33 or higher to use this accessory - How to Upgrade the i7100 Firmware

Vial Applicator Compatible Label Materials

A reference table with i7100 vial labels and compatible vial sizes can be found on the applicator product page.

URL Name	i7100-Vial-Label-Applicator-User-Manual

i7100 Vial Label Applicator User Manual