Issue
Wrap quality is poor on the A6200.


Troubleshooting
- Confirm the wire is straight while inserting it into the A6200. If the wire is bent or angled, the label will not wrap properly.
- Adjust the feed to wire: A6200 - Adjust Feed to Wire.
- Adjust the wrap count in Settings < Print Adjustments.
- There could be adhesive ooze or dust causing the labels to wrap poorly: A6200 - Clean the Printer.
- Make sure to use the correct size label for the wire.
- Do not use wire jackets with greasy coatings or the label will not wrap properly.
Related information