Salesforce

PR300 / PR600 / i7100 - Drifting Print

Printable View
« Go Back

Content

 
Article Number000012680
TitlePR300 / PR600 / i7100 - Drifting Print
Body
Issue 

The text on the label is drifting as the labels print.


Troubleshooting
 
  1. Verify the labels are installed correctly and the media guides are placed correctly at the edge of the liner. Refer to How to Load Labels and Ribbon in the i7100 Printer for more information.
 
  1. Adjust the Media Sensor to the correct position for the label type and check the Sensor settings. Refer to i7100 Sensor Position for Gapped, Sleeve, Notched, and Multiple Column Gapped Material and i7100 Top Reflect Sensor Setting.
 
  1. Verify the Tear-off settings. Tear-off is turned off when the label is under 0.5 inches in height, a raised panel label, or a permasleeve label. 
Tear-off Mode
URL NamePR300-PR600-i7100-Drifting-Print
Powered by