Body | This information can also be found on page 7 of the J1000 User Manual: J1000 - User Manual and Quick Start Guide
J1000 Service Station
The service station (J1000-PAD KIT) is an internal component used to clean the printhead and to cap the ink nozzles when not in use.
1. Cap - When not printing, the printer positions the ink cartridge so that the cap seals the printhead to minimize ink evaporation.
2. Wiper - When running a cleaning cycle, the printer expels ink into the well and then wipes the ink nozzles with the wiper.
3. Ink well - The ink well collects ink that is ejected from the nozzles during a cleaning cycle.
Installing the Service Station
1. On the printer touch screen, tap the Maintenance button.
2. Tap Service Station.
3. The printer moves internal components so that the service station dock is accessible. When it is finished moving, open the cover on top of the printer.
4. Place the service station in its dock as shown below.
5. Close the cover on the printer and then tap OK on the touch screen.
See Also
|
|
|---|
