Body | Print Position AdjustmentsPrinting adjustments can be set to make slight offset corrections to position of printed text. Adjustments set within this menu only apply for the current print job. Persistent adjustments can be made using the Printer-Part pairing feature: How to Setup a Printer-Part Pairing in LabelMark 6
- Note: These adjustments will limit printable area, this feature does not provide a suitable workaround for drifting calibration issues, or issues where text is printing with a large offset (.5”) - Text is Getting Cut Off Before the Label Margin
Use numbers to enter the Horizontal and Vertical position. The positioning is measured in inches or millimeters, depending on what you have set in the
General Options. You can enter a fraction as a decimal (e.g., ¼ inch is entered as 0.25).
-Horizontal = right
+Horizontal = left
-Vertical = up
+Vertical = down |
|
|---|
