The i5100 and i7100 do not have a built in WiFi antenna, but there is one available that connects to the printers via USB. Purchase the i5100 and i7100 USB WLAN Stick with External Antenna on Brady ID. Part number 149131.
- Power off the i5100 or i7100.
- Insert the adapter in one of the USB port on the back of the printer.
- Turn the printer on.
- Tap Settings.
- Tap Setup.
- Tap Interfaces.
- Tap Wi-Fi.
- If Wi-Fi is not automatically on, press the checkmark to turn the Wi-Fi on.
- Tap Access Point. Wait for the printer to find Wi-Fi networks.
- Tap the Network name.
The following instructions may be different depending on the Wi-Fi network that is selected.
- If the Network requires information, additional screens will appear. Select the Authentication, if applicable.
- Select a CA Certificate, if applicable or press the blue arrow to proceed to the next screen.
- Select the Inner Authentication.
- Enter the User Name and tap the blue arrow to continue.
- Enter the Password and tap the blue arrow to continue.
- Press the blue arrow.
If the Cannot establish a wireless connection displays, the network information entered is not correct. Repeat the steps.
- The connected successful message displays. Tap the green checkmark.
Related information
