Body | M610 Barcode SettingsBefore entering a barcode, determine the barcode symbology and attributes to use. Not all attributes are applicable to all barcode symbology types so they will be grayed out or not shown.
- Press Label.
- Navigate to and select Barcode.
- Input the desired settings.
- Symbology Types: UPC-A, UPC-E, EAN 8, EAN 13, Code 39, Code 128, Interleaved 2 or 5, Data Matrix, QR Code.
- Height: For most symbologies you can specify an exact height with a minimum 0.1 (2.54 mm). For symbologies that are composed of tiny squares, such as Datamatrix, the maximum height is specified.
- Bar Width: This changes the thickness of the bars and spaces within the barcode, which in turn lengthens or shortens the barcode. (Not available for some symbologies such as QR and Datamatrix.
- Ratio: The ratio of a barcode is the relationship of narrow elements to wide elements, where elements are the bars and spaces.
- Human Readable: Human readable text is the data entered that makes up the barcode. Text can be placed above or below the barcode symbology, or you can choose to not display it. If you choose to display the human readable text, a field for the text size becomes available.
- Check Digit: A check digit is used for error detection in a barcode. It consists of a single digit corrupted from the other digits in the barcode. A check mark in the Check Digit box turns the function on.
- Press ENTER when finished.
Related information
|
|
|---|
