Salesforce

J1000 - YBR & YBL Sensor Errors

Printable View
« Go Back

Content

 
Article Number000012582
TitleJ1000 - YBR & YBL Sensor Errors
Body
Issue

The J1000 gives a YBR or YBL Position Sensor Fail error.

YBR error


Troubleshooting
 
  1. Make sure the printer is on a level surface, and there are no objects obstructing the movement of the printer. 
 
  1. Move the printer carriage to the back until you hear an audible click and then forward until you hear a click. This will correct the sensors in the back left side of the printer for the y-axis rails. 

Related information 
URL NameJ1000-YBR-Position-Sensor-Fail-Error
Powered by