Body | Error CodesThe following codes appear in printer jam and sensor fail error messages.
• X: Movement on the x-axis rails, that is, from side to side. For information on the location of rails see
“Lubricating” on page 24 of the J1000 user manual: J1000 - User Manual and Quick Start Guide
• Y: Movement on the y-axis rails, that is, from front to back.
• ZH: Movement on the z-axis rails, that is, up and down.
• XL: The sensor on the left side of the x-axis rails.
• XR: The sensor on the right side of the x-axis rails.
• YBL: The sensor in the back, left side of the printer for the y-axis rails.
• YBR: The sensor in the back, right side of the printer for the y-axis rails.
• YFL: The sensor in the front, left side of the printer for the y-axis rails.
• YFR: The sensor in the front, left side of the printer for the y-axis rails.
Power cycling the printer several times may clear these errors. If the errors persist, contact Brady Technical Support for your region: Global Brady Technical Support Contact Information |
|
|---|
