The J1000 is retired but the materials are still available. Access the J1000 Tag material finder on Bradyid.com.
The materials are not smart cell enabled. This means that the printer will not automatically detect the size and information from the installed part. It is important to select the correct part in Brady Workstation when creating the tags.
The tags are installed on an adapter plate which is then used in the J1000 printer. Available adapters can be found on Bradyid.com.
The J1000 printer uses an ink cartridge. Purchase the black ink cartridge on Bradyid.com.
See the attached PDF for a full list of compatible materials.
Note: If a part is not listed in this guide, the best option is to determine which adapter card will work, and then try to validate the sizing to an existing card layout listed in this product guide. To verify the fit, samples should be ordered for test fit.
Related information
