Note: The M611 does not support a 5ghz network connection. This is for the BradyPrinter M611. For instructions on the updated model, refer to M611 Label Printer - Connect to a Wi-Fi Network.
Select Settings.
Tap Connection.
Tap Wi-Fi Network to turn on Wi-Fi. The printer searches for Wi-Fi networks and displays a list of networks found. Touch and drag to scroll the list.
Select the desired network.
If needed, enter the network password and tap the green check mark
How to Connect the M611 to a Hidden Network
If the network you need is not in the list, it may not be discoverable.
Scroll to the bottom of the discovered networks and tap Other.
Choose either Personal Network or Enterprise Network.
The system displays settings appropriate to your selection.
Personal Network
Manually enter the SSID of your personal network.
Choose the security type used by your person network.
Note: The Password setting appears when you select a security protocol for your network.
Enterprise Network
For enterprise networks, you will need information from your IT department to complete these settings.
Manually enter the SSID of the Enterprise network
Select a security protocol
Select an Authentication Protocol
Next Steps
Additional configuration may be required from the PC side.
