Configure a Static IP for the BBP 35 and BBP37 in Brady Workstation Follow these steps to configure a currently networked BBP35/37 with a static IP. Ensure the printer is simultaneously connected to your PC via USB and to your network before beginning this process.
- Launch Brady Workstation, go to settings and choose Configure Brady Network Printer.
- Select "OK" for the detected USB connected printer.
- Select the "Network" Tab and choose the "Static" option.
- Enter the static IP, Subnet Mask, and Default Gateway.
Note: Reach out to your network administrator to obtain this information.
5. Click on the WiFi Settings tab and make sure WiFi is off / disabled.
6.
Select "Apply", the settings will then be sent to the BNC. 7.
Select "OK".Related information
