By default, Brady materials are programmed with the corresponding print energy for the label and ribbon. The Print Energy can be increased or decreased. The print energy will apply more heat and potentially transfer more ink onto the label. This can be done, however, it will wear through the printhead faster.
- Tap Settings.
- Tap Printing.

- Tap Print Energy.

- Adjust the Print Energy as needed by dragging the circle left or right or tapping the Lighter (minus) or Darker (plus) boxes.
Note: A few test prints may be needed to determine the correct print energy.
Important: Increasing the Print Energy will add more wear to the printhead.

Related information