Salesforce

A5500 - Label Does Not Stick to the Wire

« Go Back

Content

 
Article Number000014447
TitleA5500 - Label Does Not Stick to the Wire
Body

Issue

 

The label is not sticking to the wire using the A5500.

 

Troubleshooting

 

  1. The Wire Diameter setting is wrong. Adjust the setting: A5500 - Wire Diameter Setting.

If it is set to Auto, manually adjust it to your specific wire diameter to get the best results.

 

  1. The wire is dirty, bent or kinked. The wire must be straight when it is inserted into the flagger mechanism. 

Ensure the wire is clean and free of contaminates. 

 

If the issue still persists, contact Global Brady Technical Support (Contact Information) and provide the part number and lot number of the materials What Is The Label/Ribbon Part Number and Lot Number? and provide the diameter of the wire. 

URL NameA5500---Label-Does-Not-Stick-to-the-Wire

Powered by