Salesforce

A5500 - Flagger Stalls During Application

Printable View
« Go Back

Content

 
Article Number000014450
TitleA5500 - Flagger Stalls During Application
Body

Issue

 

The flagger stalls during application.

 

Troubleshooting

 

  1. A wire diameter is larger than 0.6". Only flag wires between 0.060" (1.524 mm) minimum and 0.600" maximum are capable in the A5500.

 

  1. The wire is curved, bent or kinked. Insert the wire into the printer as straight as possible. 

 

If the issue persists, contact Global Brady Technical Support (Contact Information).

 

Related information 

 

URL NameA5500---Flagger-Stalls-During-Application
Powered by