Copying Internal Files from the Wraptor to External Storage
- Connect a PS2 keyboard to the Wraptor Printer.
- Power on the printer and insert an external memory card (SD card).
- After the printer boots up and is in the ready state, select the Windows Key on your keyboard.
- Select the Start window with your keypad and navigate to Programs by pressing up or down arrows on the keyboard.
- Select Windows Explorer and press Enter.
- Windows Explorer opens. Select FlashFX Disk Folder and press enter.
- Select the Spool folder.
- Copy the folder using the Ctrl + C command or select Copy from the Edit menu.
- Press Backspace on the keypad to go back to the Root on the Windows Explorer.
- Select Storage Card and press Enter.
- Paste the Spool folder copied in step 8 by using the commands Ctrl + V or select Paste from the Edit menu.
- A Confirm Folder Replace message appears. Select Yes to All.
Important: Make sure your external spool folder does not have any files as it will overwrite the existing files. There will not be a way to get these files back.
All of the internal files are now copied to the external SD storage card.
- Copy the files from the SD card to the USB Flash Drive.
Note: USB flash drives must be formatted with FAT, FAT32, or exFAT file systems. The Wraptor™ A6500 printer does not support NTFS.
Related information
