Body | The attached .PDF is Brady's response to requested Safety Data Sheet (SDS) / MSDS for current Brady products, specifically; Label Products, Tapes, Ribbons, Liners, Pipe-markers, Die-cut parts, and Batteries.
SDS downloads offered by Brady can be accessed on BradyID.
Material Compliance requests can also be submitted on BradyID.
These items are considered "Articles" per Occupational Safety and Hazard Administration (OSHA) regulations; CFR 29 1910.1200(b)(6) as well as regional/national and international regulations including the Globally Harmonized System of Classification and Labeling of Chemicals (GHS)
An "article" is defined as a manufactured item other than a fluid or particle:
a) which is formed to a specific shape or design during manufacture,
b) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and
c) which, under normal conditions of use does Not release more than very small quantities (minute or trace amounts of hazardous chemicals) and does not pose a physical hazard or health risk to employees
Per OSHA and GHS regulations, an SDS is Not required for articles, and therefore is not available for the Brady products previously mentioned.
See attached for a downloadable version of this statement. |
|
|---|
