| Body | Safety Templates (North America)Safety Templates are used with preprinted pre-sized and continuous labels.
If preprinted pre-sized labels are being used, only two templates are available and the template does not prompt your for header information. The template automatically adjusts the width of the areas depending on the width of the media.
For any other media used, you can choose from all six templates. If the template contains header information, you will be prompted to select a header.
Create Safety Label
- Press LABEL TYPE.
- Select NA Safety and then Safety Templates. The printer displays the settings screen for safety templates.
- Select the desired template.
- Tap Set Graphics. The printer displays a screen for selecting graphics.
- If the template chosen contains header information, use the left and right navigation keys to select the desired header.
- If the template chosen contains a graphic, tap Category and then tap the category of graphic that you want to choose from. This changes the selection of graphics available under Graphic #1.
- Tap Graphic #1 and then scroll through the list to select the desired graphic.
- Press
 .
- To switch to a different template, tap Set Type and go back to step 3.
- When finished, tap OK.
- The editor opens to enter. If the template has more than one text area, use the area navigation keys to access each area.
- Press PREVIEW to view the label before printing.
General Templates (Europe)General Templates present with a grid outlining the different templates to use for the safety label you want to produce. 9 templates are available with pre-sized or continuous labels.
- Press LABEL TYPE.
- Select EU Safety and then General Templates. The printer displays the settings screen for general templates.
- Select the desired template.
- For continuous labels, navigate to the Length field and enter the intended length of the label.
- Tap OK.
- Enter text or symbols in each area.
- Press PREVIEW to view the label before printing.
|
|
|---|
