| Body | J7300 - Recycle the Materials Recycle label rolls to be recycled in accordance with local regulations. Before recycling the label roll, pull apart the roll to release individual components which must be recycled in the correct recycling bins. 
- Use a screwdriver to pop the yellow handles off.
- Pull apart the label roll.
- Use the screw driver to pop the smart-cell off of the label roll.
- Recycle the parts according to local regulations.
Ink Cartridge Disposal Black - This product is not a listed hazardous waste in accordance with Federal Regulation 40 CFR Part 261. If discarded in its purchased form, this product would not be a hazardous waste either by listing or characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal whether a material has been contaminated and should be classified as a hazardous waste. Disposal is subject to local, state, and federal regulations.
CMY - Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. |
|
|---|
