Body | Note: This utility is now build into the Brady Workstation shell. If you are using Brady Workstation with your printer, you should not download the utility linked in this article. See this article for more information: Brady Workstation - Installing Brady Printers with an External Brady Network Card (BNC)The Brady Network CardThe Brady Network Card Configuration Utility is used to configure the printer to connect to the network via the installed network card. Typically, it will install along with the printer driver for supported printers. This article is for end users who have already installed their driver, but cannot find the utility. For first-time setup of the BNC, see: BNC - Brady Network Card - Supported Printers, Installation, Configuration, Upgrade, and Troubleshooting I Installed the Driver and Can't Find the BNC Utility .exeIf you installed a driver for a BNC-model printer and cannot find the utility, or deleted the utility .exe from your desktop, you can find it in this directory on your local PC: C:\Program Files (x86)\Brady Corporation\Brady Network Card Configuration Utility Where Can I Download the Utility Apart from the Driver Installation?While use-cases are limited, you can download an older version of the BNC utility attached at the bottom of this article.
- Note: If during your installation attempt you receive a message stating a newer version of this utility is already installed, see the above instructions to navigate to the directory on your local PC.
Is This All I Need to Network My Printer?The Brady Network Card Configuration Utility requires the corresponding printer driver to be installed in order to communicate with the printer and network card. The setup file attached to this article is only for reinstalling the utility if it was mistakenly removed it, or it did not install successfully along with the driver install. Use this knowledge base to find instructions to install the driver for your specific printer, e.g. "how to install the BMP51 driver ".
|
|
|---|
