Note: Do not use a SD or USB device larger than 4 or 8GB.
1. Load the SD or USB with the JScript file.
2. Insert the SD or USB into the back of the printer.
3. Power on the Printer.
4. Load the printer with material and ribbon.
5. Press the Gear on the Menu.
6. Press the Storage Icon.
7. Press Load Label and the JScript file will appear.
8. Press the Green checkmark.
9. Enter number of labels to Print.
10. Press the Green checkmark.
11. Print job will start (To Stop the print job press the RED Stop Icon). | 
