Body | Issue
When you print variable label lengths from Labelmark 6 to the BP-PR300 Plus-CS printer, at first it will print all labels in the file at the length of the first label (2" wide in the example shown below). Once you make a change to the printer driver's settings, the printer will print the labels as designed.
Workaround
If you want to print the first label at a different length as the second, third, fourth, etc...
1. Open "Devices and Printers"
2. Right click on the "BP-PR300+CS" printer and select "Printing Preferences"
3. Click on the "Advanced Setup" tab
4. Click on the "Options" button on the bottom right corner of the window
5. Under the "Print Optimization" section, select the "Optimize for Labeling software only" option
6. Click the "Close" option in the bottom right of the window
7. Click "Apply"
8. Click "OK"
9. Close out of "Devices and Printers" and send your print job.
Note: These driver settings will display in the same location in Windows 7 and 10. If you do not see these options, make sure you have the correct versions of the driver installed. Brady printer drivers can be found on BradyID.com.
 |
|
|---|
