Salesforce

i7100 - How to Clean the Printer

« Go Back

Content

 
Article Number000007920
Titlei7100 - How to Clean the Printer
Body

How to Clean the i7100



Clean the printer after every roll of labels or sooner depending on the environment. 
 

  1. Turn off the printer

 

  1. Lift the printhead.

 

  1. Remove labels and ribbon from the printer.

 

  1. Clean the platen roller with (PCK-6).
Note: Manually rotate the platen roller to clean the entire roller. 

 

 Platen roller
 
  1. Using PCK-6, clean the black and green part of the printhead
Important: Do not use any sharp or hard objects to clean the printhead.
 
Printhead
 
  1. Pull the label sensor towards you via the tab. 
Sensor bar
  1. Slide the swab (PCK-6) in between to clean the label sensor slot.
Sensor

Peel Model Printer
  1. Clean the lower platen roller on the peel model printer with PCK-6
Lower platen roller
 
  1. Clean the pinch roller with PCK-6
Pinch roller
 
 

Related information

URL NameHow-to-Clean-the-i7100-Printer

Powered by