Body | Codesoft performs best when it's able to use its internal print drivers.
i7100: CodeSoft added the i7100 print driver in their 2015 version, so it is available in version 2015 and above. If you're using Codesoft version 2014 or earlier, in Select Printer, Add the Brady BP-PR 300 or 600 dpi) Plus driver and use that to print to the i7100, which is essentially an updated version of the Brady BP PR Plus printer.
i5100: The i5100 printer is an updated version of the Brady IP300 Printer or Brady IP600 Printer. Codesoft has not created an i5100 print driver. The IP & i5100 printer models use an RFID tag in the labels that tells the printer which calibration method to use with the currently loaded labels. Therefore, unlike any other industrial THT printer by Brady or any other manufacturer, it needs to use the internal Brady IP print drivers Codesoft created for us so in the Page Setup / Label tab, you have to select the Media type (With Gap, Continuous or Marked Below which is for notched or black mark label rolls used to calibrate Top Of Form - so it knows where each label starts so it know where to put the data on the label.
See: Setup the Brady IP or i5100 printer for Printing from CodeSoft |
|
|---|
