Print Partner Release Notes
R 3.35 - May 2025
New Features and Enhancements
-
Supports new i7500 peel and internal rewind options.
-
Files with graphics that are stored on the printer will load and print faster.
-
Improved performance when printing multiple copies of labels on an i7500 printer.
Issues Fixed
-
On small labels, sometimes adding linear barcode data using Sequence, Counters, Advanced Import, Excel Import or Combined Fields resulted in a barcode too large for the label.
-
When importing from a very large Microsoft Excel file with many blank rows, the software appeared to stop responding. Response time is improved, also, the software stops reading the Excel file after 1000 blank rows.
-
If a placeholder was left blank, the name of the placeholder object was used instead.
-
When printing on an M610 printer with label supply M6C-23-412, the print was in the wrong place on the label.
-
In some circumstances, printing with the software and computer operating system set to a language other than English, an unexpected error occurred.
-
Printing appeared in the wrong location on some THT label supplies with an i7500 printer.
Related information
Previous Release Notes
3.34 - March 2025
New Features and Enhancements
-
Supports new i6100 printer.
-
For i7500 printers, the software detects whether a 300 or 600 dpi printhead is installed and prints accordingly.
3.33 - November 26, 2024
New Features and Enhancements
Issues Fixed
-
Some user-supplied JPG files would rotate when added to the label.
-
If the software was set to a language other than English, an error message would mistakenly display instead of printing.
3.31 - July 2024
New Features and Enhancements
-
Supports new i7500 printer.
-
Time to start printing print jobs (with thousands of labels) is improved on i7500, i5300, i3300, and BBP33 printers.
Issues Fixed
-
During installation, a component could trigger an alert in anti-virus software. This component is removed.
-
When printing from a template that included a Date/Time object set to refresh when opened, two labels instead of one would print.
-
With Brady Workstation units set to mm, measurements were shown in inches on the Advanced Settings window if the template was set to prompt at print time.
-
Attempting to print a file on 4” continuous labels with cut borders around the fields resulted in an error message saying that cutting would damage the printer.
3.30 Issues Fixed - May 2024
3.29 - March 2024
New Features and Enhancements
Issues Fixed
- In Prompt mode, pressing the Delete button on the keyboard caused the preview to become invisible, but did not delete the data in the field.
- Two-sided labels were not being printed correctly with the BBP72 printer.
3.28 - Issues Fixed - December 7, 2023
- In some circumstances, the software displayed an error message when importing data from a spreadsheet or .csv file.
- Sometimes printing resulted in an unknown event error.
3.27 - September 13, 2023
New Features and Enhancements
- Supports templates with counters, including counters in a combined field.
- The ability to reprint previously printed labels now applies to template files as well as label files. If the template has a counter, the labels are reprinted and the counter does not increment.
- Supports new BradyPrinter S3700 and M511 printers.
Issues Fixed
- QR codes did not scan.
- Copying and pasting data into the Data Value field for a barcode did not work.
- If the data for a barcode was filled in using Sequence or Excel Import, the data in the human-readable field did not resize to fit the box, even though the object was set to “Fit” in the template.
- When printing adjustments were set in the Label Settings tool for two BradyPrinter i5300 printers on a network, the printer with the higher Priority setting was not used to print the file.
- When the print preview opened, scanned or manually entered data on the last label replaced data on the first label.
See the attachment for previous release notes.
