Brady Workstation - Install Brady Network Printer

Prior to Brady Workstation's Direct Print functionality, Brady printers featuring an external Brady Network Card (BNC) required configuration via the Brady Network Card Configuration Utility. The utility installed as part of the printer driver installation. Direct Print functionality means the driver is no longer required, and so the BNC config utility has been built into Brady Workstation's shell.
 

Requirements

• These steps apply to the BBP33, BBP31, BBP35/37, BBP85, BMP61 and BMP51/53 printer models
• The printer must be simultaneously connected via USB to the PC and networked with a network cable
• The Brady Workstation Shell

BNC Printer Installation in Brady Workstation

1. Select the Gear icon and choose "Install Brady Network Printer."

2. Select your language and select Next. 

3. Power on and connect your printer via USB. Select Next

 

4. Select the detected printer model and select Next.

 

5. Select Next once the connection has been established.

 

6. Choose the option for Wired connection, Select Next.

 

7. Enter the name for your printer and select Next. 

 

 

8. Choose DHCP or the option to enter a static IP address

 

9. Connect the printer to your network and select Next.

 

 

 

10. Wait for installation to complete

 

11. Select Finish