Content

Article Number	000007973

Title	Brady Workstation - Custom Designer Release Notes

Body

Custom Designer Release Notes

Supports new PA1100 and PA1300 printers.
Add a background fill to labels on the J7300 printer. Labels with multiple zones can have different background fill colors for different zones.
For J7300 printers, a new Brady Safety color palette is added that closely matches Brady B595 and B569 label colors when the Print Mode on the printer is set to Vibrant.
Rotate labels 180° at print time for i7500 and J7300 printers.
For the J7300 printer, the Print Mode selection is retained when the file is sent to the Batch Print app.
Pre-designed label layouts:
- Ability to remove a layout pack.
- Usability improvements.
- Layouts scale better when placed on one zone of a label with multiple zones.
- Some layout packs have colors optimized for the J7300 printer.
Custom-ordered labels are displayed in the color of the label (instead of always white) for i5300, i7500, and M611 printers.

When printing to a printer on a network, a black box would appear and it would take a couple minutes to print.
If the first object placed on a label was a graphic of your own, and you rotated that graphic, the label would rotate, but not necessarily other objects added to the label.
Some user-supplied JPG files would rotate when added to the label.
The red striped border on a lockout tag printed orange on the J7300 printer.
Printing on a J7300 printer with PermaShield (JPSL) label supplies resulted in offset printing if the printer driver was not installed.

Related information

R 3.33 - July 31, 2024

New Features and Enhancements

Supports new i7500 printer.
Time to start printing print jobs (with thousands of labels) is improved on i7500, i5300, i3300, and BBP33 printers.

Issues Fixed

During installation, a component could trigger an alert in anti-virus software. This component is removed.
Rotating a color graphic changed the graphic to monochrome black.
Printing on label supplies DT-76-813-1, DT-25-816, and XTHT-55 resulted in an error message about syntax.
Could not print label supplies THTEP-178-593-23 and THT-45-729-10 to an i5100 printer.
Printing with an IP300 or i5100 printer with part THT-92-498-2 was not working with Autocalculate length turned on.

Improved messaging for various situations in which an unknown event error occurred due to an inability to retrieve computer specifications.
When using a single-color ribbon on a BradyPrinter S3700 printer, the Print page incorrectly displayed a red icon with a message indicating that the ribbon panel was too short.

Text objects were sometimes improperly rotated when a template also contained a rotated graphic.
Alignment was sometimes not properly applied to all labels if multiple object types were selected.
Opening the Print menu sometimes caused objects to shift position.
Printing with an IP300 or i5100 printer with part THT-92-498-2 was not working with Autocalculate length turned on.
Could not print with Brady fonts.
Part alignment was incorrect with some PermaSleeve parts: M6-___-1-342-WT.
Two-sided labels were not being printed correctly with the BBP72 printer.

Selecting Authentic label supply M6-11-427 resulted in an error message on the M611 printer.
Print was offset for various label supplies for the M710 printer.
The position of a line object shifted when you locked the object.
When entering text for a picklist in a template, you can now use the characters _ - = and + (underscore, dash, equals, and plus).
Labels printed in the wrong orientation to the BradyJet J5000 printer. For example, if you edited a label in portrait orientation, it would print in landscape orientation.
If you copied and pasted multiple objects, one of which had a cut outline, the cut outline would change to a solid line.
If you placed a text object within a shape with a cut outline and then attempted to add another text object below it, the new text object would immediately disappear.
Selecting a shape with a cut outline and then selecting a graphic changed the graphic to have a cut outline.
When selecting a particular custom label part for the IP600 printer, the image of the label sometimes appeared accurately and sometimes was blank.
In some circumstances, the software displayed an error message when importing data from a spreadsheet or .csv file.

See the attachment for previous release notes.

URL Name	Brady-Workstation-Custom-Designer-Release-Notes