Salesforce

Brady Workstation - Custom Designer Lite Release Notes

Printable View
« Go Back

Content

 
Article Number000007953
TitleBrady Workstation - Custom Designer Lite Release Notes
Body

Custom Designer Lite Release Notes

 

R 3.35 - November 20, 2024

New Features and Enhancements

  • Supports new PA1100 and PA1300 printers. 

  • Add a background fill to labels on the J7300 printer. Labels with multiple zones can have different background fill colors for different zones. 

  • For J7300 printers, a new Brady Safety color palette is added that closely matches Brady B595 and B569 label colors when the Print Mode on the printer is set to Vibrant. 

  • Rotate labels 180° at print time for i7500 and J7300 printers. 

  • For the J7300 printer, the Print Mode selection is retained when the file is sent to the Batch Print app. 

  • Pre-designed label layouts: 

    • Ability to remove a layout pack.

    • Usability improvements.

    • Layouts scale better when placed on one zone of a label with multiple zones. 

    • Some layout packs have colors optimized for the J7300 printer. 

Issues Fixed

  • When printing to a printer on a network, a black box would appear and it would take a couple minutes to print. 

  • If the first object placed on a label was a graphic of your own, and you rotated that graphic, the label would rotate, but not necessarily other objects added to the label.

  • Some user-supplied JPG files would rotate when added to the label. 

  • The red striped border on a lockout tag printed orange on the J7300 printer. 

  • Printing on a J7300 printer with PermaShield (JPSL) label supplies resulted in offset printing if the printer driver was not installed.

 

Related information

 

Previous Release Notes

 

R 3.33 – July 31, 2024

New Features and Enhancements

  • Supports new i7500 printer. 

  • Time to start printing print jobs (with thousands of labels) is improved on i7500, i5300, i3300, and BBP33 printers. 

Issues Fixed

  • During installation, a component could trigger an alert in anti-virus software. This component is removed.  

  • Rotating a color graphic changed the graphic to monochrome black. 

  • Printing on label supplies DT-76-813-1, DT-25-816, and XTHT-55 resulted in an error message about syntax. 

  • Could not print label supplies THTEP-178-593-23 and THT-45-729-10 to an i5100 printer. 

  • Printing with an IP300 or i5100 printer with part THT-92-498-2 was not working with Autocalculate length turned on.

 
R 3.32 Issues Fixed - May 2024

  • Improved messaging for various situations in which an unknown event error occurred due to an inability to retrieve computer specifications.  

  • When using a single-color ribbon on a BradyPrinter S3700 printer, the Print page incorrectly displayed a red icon with a message indicating that the ribbon panel was too short.


R 3.31 - March 2024
New Features and Enhancements
  • Supports new printers.
Issues Fixed
  • Text objects were sometimes improperly rotated when a template also contained a rotated graphic.
  • Alignment was sometimes not properly applied to all labels if multiple object types were selected.
  • Opening the Print menu sometimes caused objects to shift position.
  • Printing with an IP300 or i5100 printer with part THT-92-498-2 was not working with Autocalculate length turned on.
  • Could not print with Brady fonts.
  • Part alignment was incorrect with some PermaSleeve parts: M6-___-1-342-WT.
  • Two-sided labels were not being printed correctly with the BBP72 printer. 
 

R 3.30 Issues Fixed – December 7, 2023

  • Selecting Authentic label supply M6-11-427 resulted in an error message on the M611 printer. 
  • Print was offset for various label supplies for the M710 printer. 
  • If you copied and pasted multiple objects, one of which had a cut outline, the cut outline would change to a solid line. 
  • If you placed a text object within a shape with a cut outline and then attempted to add another text object below it, the new text object would immediately disappear. 
  • Selecting a shape with a cut outline and then selecting a graphic changed the graphic to have a cut outline. 
  • Labels printed in the wrong orientation to the BradyJet J5000 printer. For example, if you edited a label in portrait orientation, it would print in landscape orientation. 
  • In some circumstances, the software displayed an error message when importing data from a spreadsheet or .csv file. 

R 3.29 - September 13, 2023

New Features and Enhancements

  • Supports new BradyPrinter S3700 and M511 printers. 

  • Improved performance when printing a large label set. Applies to Brady printers that do not use a Windows driver to communicate with Brady Workstation. 

Issues Fixed

  • When printing adjustments were set in the Label Settings tool for two BradyPrinter i5300 printers on a network, the printer with the higher Priority setting was not used to print the file. 

  • When using some label supplies with a preprinted header (such as M6-38-595-DANGER), the header was incorrectly displayed at the bottom of the label in the software.

 


See the attachment for previous release notes.
URL NameBrady-Workstation-Custom-Designer-Lite-Release-Notes
Powered by