Technical Specifications
- 300 dots per inch (11.8 dots per mm) print resolution
- 3.0 inches per second (76.2 mm per second) print speed
- Flagging speeds:
- 6 seconds (apply only)
- 6.5 seconds (print and apply)
- Accommodates wires between 0.060" (1.524 mm) minimum and 0.600" maximum (15.25 mm) without adjustment
- Supports labels up to 2" (50.8 mm) wide
- Supports labels from 1.5" (38.1 mm) minimum to 4.0" (101.6 mm) maximum height. (4.0" / 101.6 mm maximum printable height)
- One-year warranty
- Accepts USB drives for added storage capability and standalone operation. USB drivers must be formatted with FAT, FAT32, or exFAT file systems. The BradyPrinter A5500 printer does not support NTFS.
Physical Dimensions
| Physical | Metric Units | U.S. Units |
| Dimensions (width, height, depth) | 381 x 458 x 610 mm | 15 x 18 x 24 in |
| Weight | 34 kg | 75 lb |
Environmental Ranges
| Environmental | Operation | Storage |
| Temperature * | 50 to 105°F (10 to 41°C) | 0 to 140°F (-18 to 60°C) |
| Relative Humidity | 20 to 80% non-condensing | 10 to 95% non-condensing |
*Exposing the BradyPrinter A5500 printer to direct sunlight is not recommended.
Materials Storage Specifications
Consumable material for use with this unit must be stored in its original packaging in an environment in which the temperature is below 80°F / 26° C and 60% relative humidity.
Electrical Specifications
| Input Voltage | 100 - 240 V~ |
| Current | 2 A |
| Frequency | 50/60 Hz |
Fuse
UL listed 3 Amp, 5 mm by 20 mm SLO-BLO fuse, Brady part number Y949020.
